Microneedle derma roller 540 (F019B)

1. Needle Size For Choose: 0.2mm/0.25mm/0.3mm/0.5mm/0.75mm/1.0mm/1.5mm/2.0mm/ 2.5mm/3.0mm
2. Total needles: 9 disks x 60 needles = 540 needles
3. Needle Material : Titanium or medical stainless steel
Handle/Roller Material : PC+ABS
4. Home use /Clinical use / Physician use

5.Packing size: cartoon box 33*34*35 (50 pcs)

6. High sealing sterilization packaging

Description:
Microneedle therapy uses a knead rod inlayed with 540 slender steel needles, regularly rolling in the places which need to cure, it can puncture more than 250,000 micro vessels on the epidermal within five minutes, form a efficient nutrient delivery system in the epidermis and subcutaneous tissue, with which the active ingredient of the nutrition can entry into skin effectively. Then make skin maintenance, skin care, skin treatment and skin beauty to be perfect.
Applications:
1. Scar removal including acne scar removal or treatment.
2. Stretch mark removal
3. Anti ageing.
4. Anti wrinkle
5. Cellulite treatment/ cellulite reduction or removal.
6. Hair loss treatment/ hair restoration
7. Hyper pigmentation treatment.

3 kinds of derma roller handle: White, Black, and Translucent

Different needle size options:
The 2.5mm/3.0mm-size needles can remove wrinkles, body extension scars and burning scars.
The 2.0mm-size needles can remove small injury scars, wrinkles around the eyes and acne scars.
The 1.00mm/1.5mm-size needles can remove wrinkles and pigmentations on the skin.
The 0.5mm/0.75mm-size needles can help build beautiful & healthy skin, and prevent hair loss.
The 0.2mm/0.25mm/0.3mm-size needles are perfect for cosmetics application

How is The 540 Needles Skin Roller Superior to Other Rollers?
Extra Needles per Head:
The Skin Roller has 540 needles per roller head, in comparison with the standard roller that has less than 200 needles per head.
With extra needles, you will have greater penetration in much less time.
Thinner Needle Thickness:
The needle thickness is 0.20mm, in comparison with the standard needle thickness of 0.25mm, which means you should have much less discomfort throughout needle therapy.
Needle shape leads to less discomfort:
The diamond shape of the 540 Needles Skin Roller leads to less pain compared to the standard round shaped needle of other skin rollers.
This is because the thickness of the spherical-shaped needle is twice as large as the diamond shape needle of the Deluxe Roller.

How to use a Roller?
1. Before performing the treatment, you must first identify the suitable needle length for use.
2. Disinfect position need cared and use medical alcohol to completely soak the micro-needle roller for 10-15 minutes before operation. Then wash the roller with normal saline.
3. Clean skin, rinse thorough and towel dry. Apply suitable functional nutrition on skin need to be cared if required.
4. Roll back and forth horizontally, vertically and diagonally at least 4-5 times across the area of urge and keep equably in speed and pressure.
Do not force it with too much pressure. Depending on your speed, accuracy and strength about 5 minutes of treatment is enough. The entire process should require no more than 10 minutes (Please see below diagram). Tools should be care fully used above and below the eyelids. Bone side of the upper eyelid cannot be treated unless taut the bone side of the skin.
5. Apply nutrition or mask products on skin where be cared, and pay attention to defending skin inflammation.

How to clean the dermaroller?
0.20 or 0.25mm dermaroller:
After each use, soak the dermaroller for ten minutes in a mixture of warm water and dishwashing liquid. Air-dry.
0.5mm and above:
Wash the dermaroller in warm water and dishwashing liquid, taking great care not to bend the needles. Then soak it in disinfecting alcohol for 20 minutes. Discard the alcohol. Air-dry. Put back into container. Keep the container clean with hot water but do not use any cloth or sponge to clean it since those are full of bacteria.

How often to roll the skin?
Rules of thumb:
A0.2 mm or 0.25 mm roller can be used every second day.
A0.5 mm roller can be used once a week.
A1.0 mm roller can be used per three weeks.
A1.5 mm and above roller should not be used more often than once every 5 weeks.

OEM / ODM Service
If over 500 units, your logo can be made free of charge.
If over 1000 units, your package box can be designed free of charge.